1. Safety Information#

General Safety Instructions#

Read Before Use: Carefully read this user manual before operating the AX500 device.
Qualified Personnel Only: The installation, operation, and maintenance of this device should only be performed by qualified and trained personnel. If necessary, contact Geolux for training or support.
Follow Manufacturer Guidelines: Always adhere to the safety instructions outlined in this manual and any warnings printed on the device or its components.

Voltage and Current Compliance: Ensure all connected power supplies and sensors conform to the specified voltage and current ranges listed in the product specifications. Exceeding these values may cause damage.
Environmental Protection: The AX500 must be protected from moisture and harsh environmental conditions. It has an IP54 rating for outdoor use.
Temperature Considerations: Device components may reach high temperatures when exposed to direct sunlight or high ambient temperatures. Always consider these factors during installation to ensure safe operation.

Avoid Unauthorized Repairs: Do not open or attempt to repair the AX500 device. Repairs should be carried out only by an authorized Geolux service centre.
Approved Accessories: Use only manufacturer-approved accessories and spare parts to maintain warranty and operational integrity.

Explosive Atmospheres: Do not operate the AX500 in explosive or flammable environments. The device is not rated for such conditions.
Pacemaker Interference: The device’s radio-frequency signals may interfere with cardiac pacemakers. Maintain a minimum distance of 35 cm between the pacemaker and the antenna or antenna connector.
Cold/Hot Surfaces: Metal parts of the device can become hot at ambient temperatures above 60°C or cold at ambient temperatures below 0°C. Use protective gloves when handling the device in such conditions.

Proper Usage: Geolux assumes no liability for damages arising from misuse, improper installation, or unauthorized modifications of the device. Ensure the AX500 is used in accordance with the instructions in this manual.
Warranty Nullification: Any unauthorized modifications, misuse, or failure to comply with this manual’s safety instructions voids the warranty.

Power Disconnection: In case of an emergency, disconnect the power supply from the device and follow standard safety protocols.
Support Contact: If you encounter any issues or have safety concerns, immediately contact Geolux customer support.