Skip to main content
Back to top
Ctrl
+
K
FX200 User Manual
Contents
1. Introduction
2. Connector Pin-Out and Interfaces
2.1. Serial RS-232 Interface
2.2. Serial RS-485 Interface
2.3. SDI-12 Interface
2.4. Analog 4 - 20 mA Output
3. Installing the Flow Meter
3.1. Instrument Mounting and Radar Beam Size
3.2. Site and Mounting Requirements
3.3. Signal-to-Noise Ratio
3.4. Rain and Wind
3.5. Interference and Multiple Radars
3.6. Fogging and Evaporation
3.7. Reflections
4. Flow Meter Settings
5. Data Protocols
5.1. NMEA Protocol (RS-232)
5.2. Servicing Protocol (RS-232)
5.3. Modbus Protocol (RS-485)
5.4. SDI-12 Protocol
6. Geolux Instrument Configurator
6.1. Establishing Connection
6.2. Device Configuration
6.3. Using LiDAR
6.4. Configuring Discharge Calculation
6.5. Echo Curve Acquisition
6.6. Raw Data View
Search
Error
Please activate JavaScript to enable the search functionality.
Ctrl
+
K