Skip to main content
Back to top
Ctrl
+
K
VX60 User Manual
Contents
1. Introduction
2. Connector Pin-Out and Interfaces
2.1. Serial RS-232 Interface
2.2. Serial RS-485 Interface
2.3. SDI-12 Interface
2.4. Analog 4 - 20 mA Output
3. Installing the Surface Velocity Radar
3.1. Instrument Mounting and Radar Beam Size
3.2. Site and Mounting Requirements
3.3. Signal-to-Noise Ratio
3.4. Rain and Wind
3.5. Interference and Multiple Radars
3.6. Fogging and Evaporation
3.7. Reflections
4. Surface Velocity Radar Settings
5. Data Protocols
5.1. NMEA Protocol (RS-232)
5.2. Servicing Protocol (RS-232)
5.3. Modbus Protocol (RS-485)
5.4. SDI-12 Protocol
7. Geolux Instrument Configurator
7.1. Establishing Connection
7.2. Device Configuration
7.3. Echo Curve Acquisition
7.4. Raw Data View
Index